MOS Prompters
You can control a prompter using a MOS ActiveX plugin. This workstation should not be shut down and the WinPlus application should always be running so that a MOS message cue does not build up.
For information about MOS in ENPS, see MOS Configuration.
For more information about plugins, see Detached ActiveX Windows.
To configure a MOS prompter open System Maintenance > MOS Configuration and use these settings for each prompter at your site:
|
Setting |
Description |
|---|---|
|
MOS ID |
Name of your MOS server. This name is case-sensitive and should follow the following naming convention: <family>.<location>.<site ID>.<mos> |
|
Description |
Autoscript MOS Prompter |
|
IP |
IP address of the MOS prompter |
|
ActiveX |
If you are using the Autoscript ActiveX control enter wpcontrol.wpremote |
|
Program |
A group that is homed to the local ENPS server. This can be a MOS group for a video or still store device. This allows the MOS prompter to send a list of all messages to the ENPS Client when requesting MOS-active Rundowns from the prompter and acts like a message cue. If you do not want to use an existing group create a new group with your site's call letters in the ID and have it homed to the Primary Server. In the description enter several hyphens so users will know not to open or search the group. |
|
MOS Version |
Any supported MOS version in ENPS: 2.5, 2.6, 2.8, 2.8.1, 2.8.2, 2.8.3, 2.8.4, 2.8.5, 3.8.3, 3.8.4, 3.8.5 and 4.0 |
|
Local DragDrop |
Off |
|
Story Send |
|
